-40%
12V 100AH LiFePO4 Lithium Iron Phosphate Battery With BMS Dual High/Low Temp Cut
$ 205.39
- Description
- Size Guide
Description
TOBatteryLFP12100BP
12V 100Ah
Lithium Iron Phosphate (LiFePO4)
Deep Cycle Battery With BMS
Ideal power for Solar Wind RV UPS Audio Marine
Kayak
.
The TOBattery LiFePO4 Battery Model
LFP12100BP
is a state of the art 12V 100Ah battery.
Designed primarily for loads requiring 12V voltages to operate.
This battery features a small and compact form factor designed for the smallest footprint.
The battery Is made of 4 pcs 100AH
Lithium Iron Phosphate Cells. It has an integrated BMS (
Battery Management System
) which provides complete internal cell balancing and integrated protection.
Cells and BMS are designed to be solder-free and can be easily removed and installed.
Built-in BMS, safe and long life
Compatible with 12V lead-acid battery
Can use lead acid battery charger
LFP12100BP
Battery Specifications
Voltage: 12V
Capacity: 100Ah
Outer packaging: PVC heat-shrinkable film
Charger & Discharge Connector:
Pairs of
Anderson SB50 Connectors With 8 AWG Wire
Cut-off Discharging voltage: 10V
Rated Discharging Amperage: 100 Amps
Max. Discharging current: 200 Amps @ 10S
Charging Current: <50 Amps
End of Charging Voltage: 14.5 Volts
Dimensions: (L x W x H) 5.75 in. x 5.5 in. x 8.375 in.
Weight: 17.5 lbs.
Built-in full-featured
BMS (
Battery Management System
) which provides internal cell balancing and
voltage, current and temperature protection during charging and discharging
.
BMS features
:
Charge over-voltage protection (3.65V/cell)
Discharge undervoltage protection (2.30V/cell)
Charge overcurrent protection (60A)
Discharge overcurrent and short circuit protection (120A continuous, 240A for 10 seconds, 480A for 0.25mS)
Charging high and low temperature protection (32°F~122°F)
Discharge high and low temperature protection (-4°F~130°F)
MOS high temperature protection (167°F)
Charge balance function (Starting 3.535V, balance current 185mA)
Caution
:
1:The batteries we sell are universal products and may not support some specific loads and chargers.
2:Easy to disassemble BMS, please be very careful when disassembling, the electrodes are very close to each other, please never short circuit.
3: Please keep the battery and BMS absolutely dry
4: BMS should not be used in series with each other
5: BMS will cut off the output when the temperature is too high and too low
6: BMS will cut off the output when the charging and discharging current exceeds the rated value
7: BMS will cut off the output when the voltage is too high and too low
8: BMS will automatically restore the output after the protection condition is lifted, but if the battery is connected to a load, it may be necessary to disconnect the load to resume the discharge.
Policy
:
Shipping: Standard by UPS&USPS
Return/Exchange: 30 Days
Warranty: 90 Days Seller Warranty. One Years manufacturer's warranty