Franklin Electric Subdrive 15 Connect

Description

This is a 2020 lightly used Franklin Electric Subdrive 15 connect. This drive will run a .5 HP through 1.5 HP 230V 4" Submersible 3 Phase OR 1 Phase motor. That means this drive can replace any control box 1.5 HP and down if you are looking to upgrade to a VFD or replace any subdrive 75. All the settings are configured with the dip switches or by connecting your phone to it and configuring it through the phone. (I can do it if you tell me what you have).
This drive is very lightly used. The log says it has been powered up for 19 days, and has run a motor for 14 hours total. When I got the drive someone had ripped out the cable going into the WIFI board. I replaced the board with another one I had that has a broken screen. Everything works fine with this board except the display which is only for displaying Hertz.
I ran a motor and updated the firmware and everything is in good shape as it is almost new. It does come with the used pressure sensor in the picture. Plug everything into it, program it and off it will go. Feel free to contact me with any questions.