-40%
XCA31-1400 Comp with AGM Walter Truck Grp 31 Gas Diesel Semi Bus repl battery
$ 211.19
- Description
- Size Guide
Description
XCA31-1400VMAX XTREME CRANKING AMPS SERIES
Dual Purpose Starting / Deep Cycle Battery
Marine, Truck, Farm and Heavy Duty Applications
Nominal Voltage
20Hr Capacity
RC (min)
PHCA***
MCA
CCA
Terminal Posts
Dimensions
Weight
Charging Current*
Charging Voltage
Float Voltage
12V
100AH
205
2200A
1400A
1200A
SAE AND 3/8" pos, 5/16" neg. Studs
13"w x 6.8"d x 9.39" th**)
78lb
20A or more
14.5-14.9V
13.5V-13.8V
Torque Specs in-Lbs / (Nm max): 150-220 / (16.9-22.6) Studs
Internal Resistance: 2.2 m ohm
Short Circuit Current: 5000 Amps
VMAX XCA series utilizes state of the art technology in manufacturing Thin Plate, 99.99% Pure Lead Technology to deliver this tank with
Superior Cranking Amps with adequate deep cycle capabilities.
Main Features:
Superior Cranking Amps Capabilities; 30%-50% higher than conventional batteries.
Tin plated brass terminals
Maintenance free, non spill-able, non hazardous.
Lower Internal Resistance.
Over 50% Lower Self Discharge Rate.
Widest SLA Operating Temperature Range, -40F TO 180F.
Three to Four times Longer Storage Capabilities (12-24 months compared to 4-6 months).
Superior Vibration Resistance, Cycle Life and Charge Acceptance.
Flexible mounting. Can be mounted in any position other than inverted.
SLA batteries Fastest Recharge Time; can be fully recharged within 4 hours using high current chargers of up to 2C (200Amps for this model).
Recommended Charging Options:
AC Chargers:
Any Quality Brand AGM-
Smart & Microprocessor controlled- charger with the recommended specs above can be used.
Vehicle Alternator: 14.5V-14.9V.
RV Converter: 14.5V-14.9V.
* Warning: Do not use a charger with smaller amperage than the recommended Charging Current shown above.
Maintainers should ONLY be used to maintain a fully charged battery but NEVER as a charger.
**Total Height including terminal post.
*** 5sec Pulse Hot Cranking Amps.
Operating Temperature Range:
Discharge: -40~180F
Charge: 14~140F
Storage: -4~140F
Temperature Compensation:
Cycle use:
-30mV/C
Standby use: -20mV/C
UPC:
BCI Group Codes*:
Matching Termination: 31 (+ on L.H.S. & - on R.H.S)